Käyttöohje TELEWELL TW-EA510

[. . . ] TeleWell TW-EA510 v3 ADSL 2+ -modeemi ja reititin 4 x 10/100 Mbps kytkin Palomuuri 54 Mbps WLAN­tukiasema (802. 11b+g) Ohjekirja TW-EA510 versio 3 (malli b) CE Kappale 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 1. 1 Tietoja TW-EA510 v3 (b) ADSL2+ -modeemista. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 1. 2 Myyntipaketin sisältö. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Kappale 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] First of all, check your PC's network components. The TCP/IP protocol stack and Ethernet network adapter must be installed. If not, please refer to your Windows-related or other operating system manuals. Any TCP/IP capable workstation can be used to communicate with or through the TW-EA510 v3 (b). To configure other types of workstations, please consult the manufacturer's documentation. 15 Configuring a PC in Windows XP 1. Go to Start / Control Panel (in Classic View). In the Control Panel, double-click on Network Connections 2. Double-click Local Area Connection. 3. In the Local Area Connection Status window, click Properties. 4. Select Internet Protocol (TCP/IP) and click Properties. 5. Select the Obtain an IP address automatically and the Obtain DNS server address automatically radio buttons. Click OK to finish the configuration. 16 Configuring a PC in Windows 2000 1. In the Control Panel, double-click on Network and Dial-up Connections. Double-click Local Area Connection. 3. In the Local Area Connection Status window click Properties. 4. Select Internet Protocol (TCP/IP) and click Properties. 5. Select the Obtain an IP address automatically and the Obtain DNS server address automatically radio buttons. Click OK to finish the configuration. 17 Configuring PC in Windows 98/Me 1. Go to Start / Settings / Control Panel. In the Control Panel, double-click on Network and choose the Configuration tab. 2. Select TCP/IP ->NE2000 Compatible, or the name of your Network Interface Card (NIC) in your PC. 3. Select the Obtain an IP address automatically radio button. 4. Then select the DNS Configuration tab. 5. Select the Disable DNS radio button and click OK to finish the configuration. 18 Configuring PC in Windows NT4. 0 1. Go to Start / Settings / Control Panel. In the Control Panel, double-click on Network and choose the Protocols tab. 2. Select TCP/IP Protocol and click Properties. 3. Select the Obtain an IP address from a DHCP server radio button and click OK. 19 3. 2 Factory Default Settings Before configuring the TW-EA510 v3 (b) router, you need to know the following default settings. [. . . ] Zero means always on. Allowed Access IP Address Range: Valid: Select Valid to allow remote management from these IP ranges. IP Address Range: Specify what ip address to be allowed to access device from remote side. Clink Add to insert management ip address list. 93 5. 4 Save Configuration to Flash After changing the router's configuration settings, you must save all of the configuration parameters to FLASH to avoid losing them after turning off or resetting your router. Click "Save Config" and click "Apply" to write your new configuration to FLASH. 5. 5 Restart Click Restart with option Current Settings to reboot your router (and restore your last saved configuration). If you wish to restart the router using the factory default settings (for example, after a firmware upgrade or if you have saved an incorrect configuration), select Factory Default Settings to reset to factory default settings. 94 5. 6 Logout To exit the router's web interface, choose Logout. [. . . ]